详细内容

吊钩式抛丸机简介

吊钩式抛丸机的清算室内部采用多块耐磨护板拼接,普通情况下设计吊钩式抛丸机*要将工件的旋转直径跟高度知道来设计制造。抛丸室采用钢板焊接而成,多台抛丸器布置于清算室一侧,室内装有叠层护板,内层与室体外壳焊为一体。外层采用积木式结构用*高铬淬火大螺母固定,经久耐用,维修便当。

The clearing room of the hook type shot blasting machine is spliced with several wear-resistant guard plates. Generally, when designing the hook type shot blasting machine, it is necessary to know the rotating diameter and height of the workpiece to design and manufacture. The shot blasting chamber is welded with steel plates. Several shot blasting machines are arranged on one side of the clearing room. The room is equipped with laminated guard plates. The inner layer and the room shell are welded together. The outer layer adopts building block structure and is fixed with special high chromium quenching nuts, which is durable and easy to maintain.

车架抛丸机 (2).jpg

为方便维修检修,在主室体的外侧设有启闭式检修门,便于经常观察室内护板及抛丸器易损件的磨损情况。关闭处均选用便当的手旋式锁紧螺母大大减轻了检修*人员的诸多烦琐工序。由于保送螺旋并非耐磨合金制造,在抛丸室体底部仓板汇集处装有护板,护板的下端为锯齿形用于经过掉落的弹丸,这样确保了螺旋的运用寿命。

在抛丸室上部设计迷宫式除尘吸风口,可以及时扫除抛丸惹起的粉尘,优化回收系统轴承的工作环境,延长部件运用寿命。抛丸室顶部启齿处,设有迷宫式密封槽、橡胶和毛刷密封帘,结构精巧,以根绝弹丸反弹到室体外面。

In order to facilitate maintenance and repair, an open and closed access door is set outside the main chamber, which is convenient to observe the wear of the indoor guard board and the wearing parts of the shot blasting machine frequently. Convenient hand screw lock nuts are selected at the closing position, which greatly reduces many cumbersome procedures for maintenance operators. Since the escort screw is not made of wear-resistant alloy, a guard plate is installed at the collection of the chamber plates at the bottom of the shot blasting chamber. The lower end of the guard plate is zigzag for the dropped shot, which ensures the service life of the screw.

吊钩抛丸机在日常运用过程中,假如抛丸机配套的提升机减速机运转正常,但是不上料,形成抛丸机纵向、横向螺旋卡住,从而形成机器配件损伤的问题,我们该如何处理处理办法:调整提升带松紧度,从而调整提升斗提丸料的速度,到达与工件保送速度分歧。

In the daily operation process of hook shot blasting machine, if the elevator reducer matched with the shot blasting machine operates normally but does not load, the longitudinal and transverse spiral of the shot blasting machine is jammed, thus causing damage to the machine accessories, how should we deal with it: adjust the tightness of the lifting belt, so as to adjust the speed of lifting the shot bucket, so as to reach the difference with the workpiece escort speed.

东莞市百涛自动化喷砂设备有限公司喷砂机生产供应,吊钩式抛丸机


关于我们



业务范围


经典案例

扫码咨询

在线客服

百涛自动化喷砂设备有限公司

地址:广东省东莞市长安镇厦岗新业北街13号

电话:+86 137-9060-1361

微信:a415071642

邮件:415071642@qq.com


seo seo