铸铁件履带式抛丸机

很多零散铸铁件只铸造出模之后，都需要进行清砂、去除氧化皮、表面强化等清理工艺，基本上都是一次性大量的清理工作，所以，百涛抛丸机厂家对小批量零散铸铁件清理推荐使用履带式抛丸机。

　　履带式抛丸机是高强度耐磨橡履带或锰钢履带装载工件。它利用高速回转的叶轮，将弹丸抛向放在抛丸机机体内的工件上，达到清理工件的目的。它适合用于小型铸件、锻件、冲压件、齿轮、弹簧等件的清砂、除锈、去除氧化皮和表面强化，特别适用于不怕碰撞的零件的清理及强化。

铸铁件履带式抛丸机，小零件批量除锈清理方案-东莞百涛抛丸机厂家

　　一次可以大批量清理铸铁小零件，省时省力省人工成本。

　　直接将铸铁小零件放入机器的上料斗内，按键后自动投入进抛丸清理室。

　　设备配有自动分离器，很好的将清理的砂土、氧化皮等咋物质分离进废料管排出，钢丸也会被分离出来，进行循环的使用，不必担心钢丸的使用浪费。

　　设备进行抛丸清理过程中产生的尘土，会被自动吸入除尘箱里面，所以工作时不会造成环境的污染，也符合国家相关的环保规定。

    抛丸清理工艺不会伤害铸铁小零件的金属体，并且强化金属表面的硬度。

　　抛丸工艺不仅可以清砂、去除氧化皮、表面强化，还能对铸铁小零件起到抛光的作用。

Many scattered cast iron castings only need to be cleaned by sand cleaning, oxide skin removal, surface strengthening and other cleaning processes after casting and casting, which are basically one-time and large amount of cleaning work. Therefore, the manufacturer of Baitao shot blasting machine recommends the use of crawler type shot blasting machine for small batch of scattered cast iron castings.

Crawler type shot blasting machine is a high-strength wear-resistant rubber track or manganese steel track loading workpiece. It uses high-speed rotary impeller to throw the shot onto the workpiece placed in the body of the shot blasting machine, so as to achieve the purpose of cleaning the workpiece. It is suitable for sand removal, rust removal, oxide skin removal and surface strengthening of small castings, forgings, stamping parts, gears, springs and other parts, especially for cleaning and strengthening of parts that are not afraid of collision.

Crawler type shot blasting machine for iron castings, rust removal and cleaning plan for small parts in batches - Dongguan Baitao shot blasting machine manufacturer

It can clean small cast iron parts in large quantities at one time, saving time and labor.

Put the small cast iron parts directly into the feeding hopper of the machine, and press the key to automatically put them into the shot blasting room.

The equipment is equipped with an automatic separator, which can well separate the cleaned sand, oxide skin and other substances into the waste pipe for discharge, and the steel shot will also be separated for recycling use. There is no need to worry about the waste of steel shot.

The dust generated during the shot blasting process of the equipment will be automatically sucked into the dust box, so it will not cause environmental pollution during operation, and it also complies with the relevant national environmental regulations.

The shot blasting process will not damage the metal body of small cast iron parts, and strengthen the hardness of the metal surface.

Shot blasting process can not only remove sand, oxide skin, surface strengthening, but also play a role in polishing small cast iron parts.